Fixing a Garage Door Repair Arlington TX cable can be a complex task that requires attention to detail and proper technique.

Here’s a step-by-step guide to help you understand the process:

  1. Safety first: Before you begin, ensure that you take necessary safety precautions. Wear safety goggles, gloves, and appropriate clothing to protect yourself from any potential hazards.
  2. Disconnect the power: Disable the garage door opener by unplugging it from the electrical outlet or turning off the circuit breaker that supplies power to the opener. This will prevent any accidental activation of the door while you’re working on it.
  3. Identify the problem: Inspect the garage door cable to determine the extent of the damage or issue. Common problems include frayed or broken cables, loose cables, or cables that have come off the drum or pulley.
  4. Gather necessary tools: To fix the cable, you’ll need a few tools such as locking pliers, adjustable wrenches, a ladder, a winding bar, and a replacement cable if needed.
  5. Release tension: To work on the cable, you’ll need to release the tension on the garage door springs. Insert a winding bar into one of the winding cone holes on the spring and carefully unwind it. Repeat this process for the other spring if your door has two.
  6. Disconnect the cables: Locate the bottom bracket attached to the lower corners of the garage door. Use locking pliers to secure the cable to prevent it from unwinding further. Remove the cable from the bottom bracket and let it hang loose.
  7. Remove the damaged cable: If the cable is frayed or broken, remove it completely by loosening the cable drum. Detach the cable from the drum, ensuring it doesn’t unwind abruptly. If the cable is intact but has come off the drum or pulley, you can skip this step.
  8. Install the new cable: If you need to replace the cable, thread the new cable through the pulley and cable drum. Follow the manufacturer’s instructions for proper installation. Ensure the cable is properly seated in the drum and pulley before proceeding.
  9. Reattach the cable: Once the new cable is installed or if you’re reusing the existing cable, reattach it to the bottom bracket. Make sure it is properly secured and aligned.
  10. Wind the springs: Using the winding bar, wind the torsion springs back to their original tension. Be cautious and follow the manufacturer’s guidelines to avoid any injuries. This step may require assistance from another person for safety purposes.
  11. Test the door: Reconnect the power to the garage door opener and test the door’s functionality. Open and close it a few times to ensure that the cable is functioning properly and the door is balanced.
  12. Final adjustments: If necessary, make minor adjustments to the cable tension to achieve optimal door balance. Follow the manufacturer’s instructions or consult a professional for guidance on adjusting the tension.

Remember, working with Garage Door Repair Arlington TX cables can be dangerous, especially when dealing with tension springs. If you’re uncertain or uncomfortable performing these repairs, it’s advisable to seek professional assistance to ensure safety and avoid further damage to the door or injury to yourself.

South Arlington Overhead & Garage Door

3330 Matlock Rd #204, Arlington, TX 76015

817-383-2173