Month: February 2023 Page 1 of 2

On February 28, 2023

As someone who has recently replaced my garage doors, I can attest to the fact that the cost can vary significantly depending on several factors.

I’ll provide an overview of the factors from Garage Door Repair Forney TX that can affect the cost of garage door replacement and provide a rough estimate of what you can expect to pay.

The first factor that affects the cost is the type of garage doors you choose. I opted for traditional raised-panel steel doors, which were more affordable than some of the other options available. For a basic set of doors, I paid around $1,500.

The materials used to construct the doors can also affect the cost. As mentioned, I chose steel doors, which are typically more affordable than wood doors. However, if you’re looking for a more high-end option, such as custom-made wood doors, you can expect to pay significantly more.

The size of the doors is also a factor that can affect the cost. In my case, I had standard-sized doors, which made the installation relatively straightforward. If you have larger or irregularly sized doors, you may need to have custom doors made, which can increase the cost.

Finally, the complexity of the installation can also affect the cost. In my case, the installation was relatively simple since I was replacing existing doors. However, if you’re installing new doors or need to make significant modifications to your garage to accommodate the new doors, the installation may be more complex and expensive.

All things considered, I paid around $2,500 for the replacement of my garage doors. While this may seem like a significant investment, I feel that it was worth it for the added security and curb appeal that the new doors provide. Additionally, I was able to find a reputable installer who did a great job with the installation, which gave me peace of mind knowing that my doors were installed correctly and safely.

In summary, based from Garage Door Repair Forney TX, if you’re considering replacing your garage doors, I would recommend getting quotes from multiple installers to compare prices and ensure that you’re getting a fair price for the installation. It’s also important to choose a reputable installer with experience installing garage doors to ensure that the installation is done correctly and safely. While the cost of replacing garage doors can vary widely, it’s an investment that can add value to your home and improve the overall look and feel of your property.

BH Garage Door Repair of Forney

108 E Main St, Forney, TX 75126

469-820-3581

How to Fix a Squeaky Garage Door? – Right on Time Garage Doors of San Antonio

On February 28, 2023

One day, I noticed that my garage door was making an annoying squeaking noise every time I opened or closed it. It was bothering me a lot and I knew I needed to do something about it.

So, I did some research and found out that there are several possible causes of a squeaky garage door as stated in Garage Door Repair Denison TX.

First, I checked the hinges, rollers, and tracks for any dirt or debris that could be causing the noise. I used a cloth to clean them thoroughly, making sure to remove any grime or dirt buildup. Then, I applied a silicone-based lubricant to all the moving parts. I made sure to cover all hinges, rollers, and tracks with the lubricant and worked the door up and down a few times to distribute the lubricant evenly.

After lubricating the parts, I tested the door to see if the squeaking had stopped. Unfortunately, the noise persisted. I then checked the bolts and screws on the hinges and rollers to see if any were loose. I tightened all of them with a wrench to make sure they were secure.

Still, the squeaking didn’t go away. So, I inspected the rollers and hinges for any signs of wear or damage. I noticed that one of the rollers was damaged and needed to be replaced. I went to my local hardware store and bought a new roller and hinge. I then unscrewed the old one and replaced it with the new one. I repeated this process for the other rollers and hinges, making sure to tighten all screws and bolts.

After replacing the damaged roller and hinge, I tested the door again and was pleased to find that the squeaking had finally stopped! It was such a relief to have a quiet garage door once again.

In conclusion, according to Garage Door Repair Denison TX, fixing a squeaky garage door can be a straightforward process that involves cleaning, lubricating, tightening bolts and screws, and replacing worn-out components. With a little bit of patience and effort, I was able to fix my squeaky garage door and prevent future noise.

Right on Time Garage Doors of San Antonio

341 St Cloud, San Antonio, TX 78228

210-963-5866

How to Repair Garage Door Opener – Dragon Garage Door & Gates

Garage door openers are essential for the safety and convenience of homeowners. They are designed to make it easy to open and close garage doors without having to do so manually. However, like any other electronic device, garage door openers can sometimes develop faults and require repairs.

In this article, we will discuss some of the common problems with Garage Door Repair Southlake TX openers and how to repair them.

The Door Does Not Open or Close

If your garage door opener fails to open or close the door, there are several reasons why this might be happening. The first thing you should do is check the power source. Make sure that the power cord is plugged in and that the circuit breaker is not tripped. If everything seems fine, check the batteries in the remote control. If the batteries are dead, replace them and try again.

Another reason why your garage door opener might not be opening or closing the door is a faulty safety sensor. Most garage door openers have safety sensors that prevent the door from closing if something is blocking its path. Check the sensors to ensure that they are properly aligned and not obstructed by any debris.

The Door Reverses When Closing

If your garage door opener reverses when closing, this could be due to a problem with the safety sensors. Make sure that the sensors are properly aligned and that there is nothing obstructing them. If this does not solve the problem, the sensors may need to be replaced.

Another reason why your garage door opener might be reversing when closing is a problem with the closing force. Most garage door openers have an adjustment knob that controls the closing force. If this knob is set too high, the door may reverse when closing. Adjust the knob until the door closes properly.

The Door Opens But Does Not Close

If your garage door opener opens but does not close, this could be due to a problem with the limit switch. The limit switch is responsible for telling the garage door opener when to stop opening or closing the door. If the limit switch is not working properly, the door may not close all the way.

To fix this problem, locate the limit switch and adjust it until the door closes properly. If the limit switch is damaged, it may need to be replaced.

The Motor Runs But the Door Does Not Move

If your garage door opener motor runs but the door does not move, this could be due to a problem with the drive belt. Check the belt to make sure that it is not damaged or broken. If the belt is damaged, replace it.

Another reason why the motor might be running but the door is not moving is a problem with the trolley. The trolley is responsible for moving the door along the track. If the trolley is damaged or obstructed, it may not be able to move the door. Check the trolley to make sure that it is properly aligned and not obstructed by any debris.

The Remote Control Does Not Work

If your garage door opener remote control does not work, the first thing you should do is check the batteries. If the batteries are dead, replace them and try again. If the batteries are fine, check the antenna on the motor unit. Make sure that it is properly aligned and not obstructed by any debris.

If none of these solutions work, the remote control may need to be reprogrammed. Consult the user manual for instructions on how to reprogram the remote control.

Conclusion

Garage Door Repair Southlake TX openers are a convenient and essential part of any home. However, they can sometimes develop faults and require repairs. In this article, we have discussed some of the common problems with garage door openers and how to repair them.

Dragon Garage Door & Gates

351 Central Ave #7, Southlake, TX 76092, United States

1-817-587-0445

How to Install a Roll Up Garage Door – Murphy Garage Door & Gates

In Uncategorized

Installing a roll-up garage door may seem like a daunting task, but with the right tools and instructions, it can be done in a relatively straightforward manner.

I will guide you through the steps involved in installing a roll-up garage door as stated in Garage Door Repair Murphy TX.

To install a roll-up garage door, I start by measuring the opening where I want to install the door. I measure the width at the top, middle, and bottom of the opening, and use the smallest measurement as my final measurement. For the height, I measure from the floor to the header above the opening, and add an extra inch or two to the height measurement to allow for the track clearance.

Next, I install the track and brackets. I begin by installing the brackets on the jamb using the screws provided. I make sure they are level and aligned with the top of the opening. Then, I attach the track to the brackets using the screws provided. The track should be level and aligned with the top of the opening.

Now it’s time to install the door panels. I begin by inserting the rollers into the hinges on the bottom panel. Then, I slide the panel into the track and attach it to the brackets using the provided hardware. I repeat this process for the remaining panels, making sure to align them correctly and attach them securely.

After installing the door panels, I install the springs and cables. I attach the cable drums to the ends of the springs, and then slide the springs onto the shaft. I secure the shaft to the header bracket using the provided hardware. Then, I attach the cables to the bottom brackets and the cable drums, making sure they are properly tensioned.

Before finishing up, I test the door to make sure it operates correctly. I open and close it several times, making sure it moves smoothly and the cables and springs are properly tensioned. I adjust the tension if necessary.

If I wish to install an opener, now is the time to do so. I follow the manufacturer’s instructions to install the opener and connect it to the door.

Finally, as stated in Garage Door Repair Murphy TX, I finish up by attaching the weatherstripping to the bottom of the door and installing any additional hardware, such as handles or locks. I test the door once more to make sure everything is working correctly. By following these steps, I can install a roll-up garage door quickly and easily, and enjoy the benefits of a new, functional garage door.

Murphy Garage Door & Gates

223 FM 544 #16, Murphy, TX 75094, United States

469-425-7816

The Dos and Don’ts of DIY Painting Projects for Your Home in Stockton, CA

In Painting Services

Painting Projects for Your Home in Stockton, CA

Painting is among the most affordable and cost-effective methods of changing the appearance the feel and appearance of your house located in Stockton, CA. The freshness of a coat will breathe new life into an old and outdated space and make it appear brighter as well as inviting and more contemporary. While painting might appear like a straightforward DIY task but there are some rules and don’ts to remember for a successful result. In this article we’ll look at the most important tips and tricks to follow when doing DIY painting Stockton CA ideas for homes.

Dos:

Choose the appropriate color for the project you are working on

The kind of paint you select will depend on the kind of surface that you’re painting and the function of the room. For example kitchens and bathrooms require a more durableand water-resistant paint than bedrooms and living rooms. Also, you’ll need pick between water-based or oil-based paints, based on the kind of surface you’re painting and the look you’d like to achieve.

Do not hesitate to invest in top-quality equipment

High-quality supplies can make the impact when it comes to getting a professional finish. Do not skimp on the supplies such as brushes, rollers and painter’s tape as they can help you create straight lines that are clean and straight and stop drips and smudges.

Do prep your surfaces properly

Before painting, you must prepare your surfaces in a proper manner. This includes cleaning them thoroughly and sanding them smooth and filling any cracks or holes and then tape off any areas that you do not wish to paint. The proper preparation is vital to creating a smooth and uniform finish that will last.

Do use a primer

Primer is crucial to create an even, smooth surface for paint to be able to adhere to. It assists in covering any flaws and even enhance the texture of the surface and create a more professional appearance.

Take your time

The rush of completing a painting project can lead to disaster. Be patient and proceed in a systematic manner, starting by working on the edges and corners and moving to the middle area. This will ensure you get a an even, neat appearance that looks professional and polished.

Don’ts:

Don’t skimp on the preparation work

The lack of preparation is a common error most DIY painters commit. If you don’t take the time to prepare your surfaces properly the paint job you apply will not last and you’ll get poor-looking paint.

Don’t neglect safety

Painting is a risky process, and it’s important to take the proper precautions to protect yourself. Wear goggles, gloves, and a mask to shield yourself from the fumes of paint and spills. Also, ensure that your room is adequately ventilated, and make sure you take frequent breaks to avoid fatigue.

Do not apply too many coats of paint

The application of too much paint could cause smudges and drips and uneven appearances. Instead, apply thin coats of paint, and let each dry prior to making the following. This will allow you to achieve the most uniform, professional appearance.

Do not paint in the wrong environment

In the wrong circumstances, painting could cause a myriad of problems, ranging from long drying times to irregular texture. Avoid painting at extreme temperatures, extreme humidity or directly in sunlight, because these conditions could cause the painting to dry over fast or take too long, which can affect the final look.

Make sure to properly clean up

Clean up after an art project is crucial to maintain your tools and keeping your house clean. Be sure to dispose of any paint that is not used and scrub your rollers, brushes, and other tools thoroughly. This will ensure that they’re in good working order to be used for the next project.

In the end painting your home could be an enjoyable and cost-effective method to change the look of your living space.

How to Program a Chamberlain Garage Door Opener – Grayson County Garage Door Repair

So, I recently purchased a Chamberlain garage door opener and I need to program it to work with my remote control and keypad. After reading through the user manual, I found that programming the garage door opener is a relatively simple process that can be completed in just a few steps.

I’ll walk you through the steps I took from Garage Door Repair Sherman TX to program my Chamberlain garage door opener.

Step 1: Identify my Chamberlain garage door opener model The first thing I needed to do was identify the model of my Chamberlain garage door opener. I found the model number on the back of the motor unit, and this helped me to determine the specific steps required for programming my garage door opener.

Step 2: Clear the memory of the opener To clear the memory of my Chamberlain garage door opener, I located the “learn” button on the motor unit. I found that the location of the “learn” button may vary depending on the model of my garage door opener. In my case, the “learn” button was located near the antenna wire. I pressed and held the “learn” button for approximately 6 seconds or until the indicator light on the motor unit turned off. This cleared the memory of my garage door opener and erased any previously programmed remote controls.

Step 3: Program the remote control With the memory cleared, I was ready to program my remote control. I located the “learn” button on the motor unit and pressed it once. The indicator light on the motor unit turned on. Within 30 seconds, I pressed the button on the remote control that I wanted to program. The motor unit beeped to confirm that it had received the signal. I repeated this process for each additional remote control that I wanted to program. Once I had programmed all of my remote controls, I pressed the “learn” button again to exit programming mode.

Step 4: Test the remote control After programming the remote control, I tested it by pressing the button on the remote control to operate the garage door opener. The garage door opener responded to the remote control, indicating that the programming was successful.

Step 5: Program the keypad (optional) I decided to also program the keypad that came with my Chamberlain garage door opener. To program the keypad, I located the “learn” button on the motor unit and pressed it twice. The indicator light on the motor unit turned on. I then entered the 4-digit code that I wanted to use on the keypad and pressed the “enter” button. The motor unit beeped to confirm that it had received the code. I tested the keypad by entering the code and pressing the “enter” button to operate the garage door opener.

In conclusion, in reference to Garage Door Repair Sherman TX, programming my Chamberlain garage door opener was a simple process that I completed in just a few steps. I’m now able to operate my garage door with my remote control and keypad. It’s always important to identify the specific model of your garage door opener before beginning the programming process to ensure that you follow the correct steps.

Grayson County Garage Door Repair

1940 Everheart Rd, Bells, TX 75414, United States

903-500-7205

How to Fix a Garage Door – South Denton Overhead Garage Door

On February 23, 2023

A Garage Door Repair Roanoke TX is an essential part of any home that provides security and protection for your vehicles, tools, and other possessions. However, it can be frustrating when it malfunctions, making it difficult to open or close.

If you’re experiencing issues with your garage door, there are several steps you can take to fix it.

In this article, we’ll outline the steps to help you fix your garage door and get it back to working order.

Step 1: Identify the Problem The first step in fixing your garage door is to identify the problem. Some common issues include a broken spring, a misaligned track, a faulty opener, or worn-out rollers. Start by visually inspecting the door and looking for any visible signs of damage or wear. Check the tracks and rollers to ensure they are clean and free of debris. Check the opener to see if it is working correctly. If you can’t identify the problem, it’s best to call in a professional to diagnose the issue.

Step 2: Tighten the Hardware Garage doors can rattle and shake, causing the hardware to loosen over time. Loose hardware can cause the door to malfunction or become unstable. Inspect the nuts, bolts, and screws that hold the door together and tighten them as needed. Use a socket wrench to ensure the hardware is securely fastened.

Step 3: Lubricate Moving Parts Garage doors have many moving parts that require regular maintenance to keep them running smoothly. Over time, the parts can become dry and stiff, causing the door to creak or become difficult to operate. Lubricate the rollers, tracks, hinges, and springs with a silicone-based lubricant. Avoid using WD-40 or other petroleum-based lubricants, as they can attract dirt and debris.

Step 4: Replace Worn-Out Rollers The rollers on your garage door are responsible for helping the door move smoothly along the tracks. Over time, the rollers can wear out, causing the door to become unbalanced or jammed. Inspect the rollers and replace any that are worn or damaged. You can purchase replacement rollers at your local hardware store.

Step 5: Align the Tracks If the tracks on your garage door are misaligned, the door may not open or close correctly. Inspect the tracks to see if they are properly aligned. If not, use a level to adjust them as needed. Loosen the bolts that hold the tracks in place and gently tap them into position. Once the tracks are aligned, tighten the bolts.

Step 6: Replace Broken Springs The springs on your garage door are responsible for helping to lift the door. Over time, the springs can break or wear out, causing the door to become difficult to open or close. If you suspect that your springs are broken, it’s best to call in a professional to replace them. Attempting to replace the springs yourself can be dangerous.

Step 7: Check the Opener If your garage door opener is not working correctly, it can cause the door to malfunction. Check the opener to see if it is functioning correctly. Inspect the remote control to ensure the batteries are working. Check the sensors to see if they are dirty or misaligned. If you can’t identify the problem, it’s best to call in a professional.

Step 8: Test the Door Once you’ve made the necessary repairs, test the door to ensure it is functioning correctly. Open and close the door several times to ensure it is moving smoothly along the tracks. Listen for any unusual noises or vibrations, which could indicate a problem.

In conclusion, fixing a Garage Door Repair Roanoke TX can be a simple process if you follow the steps outlined above.

South Denton Overhead Garage Door

112 US-377 #9, Roanoke, TX 76262, United States

1-817-873-2942

How to Lubricate a Garage Door – BH Garage Door & Gates of Celina

On February 23, 2023

I recently lubricated my garage door, and it was a simple yet important maintenance task that I’m glad I did.

Here’s how to lubricate your garage door as stated in Garage Door Repair Celina TX:

To start, I gathered my supplies, including a lubricant designed for garage doors, a rag, a step ladder, and safety glasses. I also made sure to clean the garage door and its moving parts, removing any dirt, dust, or debris from the tracks, rollers, hinges, and springs.

Then, I applied the lubricant to the tracks on either side of the garage door, making sure to apply it evenly and not overdo it. Next, I lubricated the rollers and hinges, taking care to get the lubricant into the joints. Finally, I lubricated the springs, being careful due to the tension they’re under.

After I finished lubricating all the moving parts, I tested the garage door by opening and closing it a few times to make sure it was running smoothly. I also wiped off any excess lubricant with a clean rag to avoid attracting dirt and debris.

Overall, based from Garage Door Repair Celina TX, lubricating my garage door was a simple and important maintenance task that I’ll be sure to repeat at least once a year to keep my garage door running smoothly and extend its lifespan.

BH Garage Door & Gates of Celina

102 N Ohio St #4A, Celina, TX 75009, United States

214-949-4432

How to Program a Garage Door Opener – Garage Door Experts of Azle

On February 22, 2023