Maintaining your Garage Door Repair Strongsville OH is essential for it to function properly and last a long time. One of the most important parts of garage door maintenance is keeping the door properly lubricated. This not only helps keep the door working smoothly but also prevents wear and tear on the moving parts.

In this article, we will discuss how to oil a garage door, step by step:

Step 1: Gather Your Supplies

Before you begin, you will need to gather a few supplies. You will need:

  • A can of lubricant (spray or liquid)
  • A rag or cloth
  • Safety glasses
  • Gloves

Step 2: Inspect the Door

Before you start lubricating, inspect the door for any visible signs of wear or damage. Look for cracks, dents, or rust on the tracks and rollers. Make sure all the bolts and screws are tight, and there are no loose parts.

Step 3: Clean the Door

Once you have inspected the door and made any necessary repairs, clean the door and its components. Use a damp cloth to remove any dirt, dust, or debris that has accumulated on the door and its parts.

Step 4: Lubricate the Tracks

Apply a small amount of lubricant to the tracks on both sides of the garage door. Make sure to apply the lubricant evenly, and use enough to cover the entire track. Move the door up and down a few times to ensure the lubricant is evenly distributed.

Step 5: Lubricate the Rollers

Next, apply lubricant to the rollers. Place a rag or cloth under the roller to catch any drips. Spray or apply the lubricant on the roller and the shaft. Move the door up and down a few times to ensure the lubricant is evenly distributed.

Step 6: Lubricate the Hinges

Apply lubricant to the hinges on both sides of the door. Make sure to apply the lubricant to the pivot points and the pins. Move the door up and down a few times to ensure the lubricant is evenly distributed.

Step 7: Lubricate the Springs

Finally, apply lubricant to the springs. This is a critical step as the springs are under a lot of tension, and lubricating them properly will prevent them from breaking prematurely. Use caution when working with the springs, as they can be dangerous. Apply lubricant to both the torsion and extension springs.

Step 8: Wipe off Excess Lubricant

After you have lubricated all the moving parts, wipe off any excess lubricant with a clean cloth. Be sure to wipe down the tracks and rollers, as excess lubricant can attract dirt and dust, which can cause the door to stick.

Step 9: Test the Door

Once you have finished lubricating the door, test it to make sure it is working properly. Open and close the door a few times to make sure it moves smoothly and there are no strange noises or vibrations.

Step 10: Repeat as Needed

Garage doors should be lubricated at least once a year. However, if you use your garage door frequently or live in an area with extreme temperatures, you may need to lubricate your door more frequently. Repeat the steps above as needed to keep your garage door working smoothly.

In conclusion, lubricating your Garage Door Repair Strongsville OH is an essential part of maintenance that can prolong the life of your door and prevent costly repairs. By following the steps above, you can easily lubricate your garage door and ensure it continues to function properly for years to come.

Strongsville Garage Door Repair

440-271-8232