Garage door wheels, also known as rollers, play a crucial role in the smooth operation of your garage door. Over time, these wheels can become stiff, worn out, or rusted, causing your garage door to become noisy and difficult to open or close. Regular greasing of your garage door wheels can prevent this from happening and ensure the smooth operation of your garage door.

Here are the steps to grease garage door wheels as stated in Garage Door Raleigh NC.

Step 1: Gather Supplies

Before you begin, you need to gather the necessary supplies. You will need:

  • A silicone-based or lithium-based lubricant designed specifically for garage door rollers. Avoid using grease as it can attract dirt and debris, making the problem worse.
  • A clean cloth or rag to wipe off any excess grease.
  • A ladder or step stool to access the garage door tracks.

Step 2: Prepare the Garage Door

To grease the garage door wheels, you first need to prepare the garage door by making sure it is closed and locked. This will keep the garage door in place and prevent it from moving while you grease the wheels.

Step 3: Locate the Garage Door Rollers

Locate the garage door rollers. They are usually found on the sides of the door, attached to hinges that allow the door to move up and down on the tracks. You may need to use a ladder or step stool to reach the rollers.

Step 4: Clean the Garage Door Rollers

Before you can grease the garage door rollers, you need to clean them first. Use a clean cloth or rag to wipe off any dirt, debris, or rust that has accumulated on the rollers. This will ensure that the lubricant can penetrate the rollers properly and do its job.

Step 5: Apply the Lubricant

Once the garage door rollers are clean, it’s time to apply the lubricant. Shake the can of lubricant well before use to ensure that the lubricant is properly mixed. Apply the lubricant to the rollers, making sure to distribute it evenly over the entire surface of the roller.

Be careful not to apply too much lubricant as this can cause it to drip onto the garage floor or attract dirt and debris. A few drops of lubricant on each roller should be sufficient.

Step 6: Move the Garage Door

After applying the lubricant, move the garage door up and down a few times to allow the lubricant to penetrate the rollers properly. This will ensure that the lubricant reaches all parts of the roller and that the roller moves smoothly on the tracks.

Step 7: Wipe off any Excess Lubricant

Use a clean cloth or rag to wipe off any excess lubricant that may have dripped onto the garage floor or accumulated on the rollers. This will prevent dirt and debris from sticking to the rollers and causing them to malfunction.

Step 8: Repeat the Process

Repeat the process of greasing the garage door rollers every six months or so to keep your garage door operating smoothly. Regular maintenance of your garage door rollers can help prevent expensive repairs and extend the life of your garage door.

Conclusion

As per Garage Door Raleigh NC, greasing garage door rollers is an important part of garage door maintenance that can help prevent problems with your garage door. By following these simple steps, you can ensure that your garage door operates smoothly and quietly, making your life a lot easier. Regular maintenance of your garage door rollers can help prevent expensive repairs and extend the life of your garage door, so it’s worth taking the time to do it right. If you encounter any problems with your garage door rollers, it’s always best to consult a professional garage door technician for assistance.

Raleigh Garage & Overhead Doors

1028 Oberlin Rd, Raleigh, NC 27605

919-443-6516