A garage door cable is an important component of a garage door system. The cables work together with the springs to lift and lower the garage door smoothly. If the cables become damaged or worn out, it can cause the garage door to malfunction and become unsafe.

Here is a step-by-step guide from Garage Door Parma OH on how to fix a garage door cable:

Step 1: Disconnect the Power

Before beginning any work on your garage door, disconnect the power by unplugging the garage door opener from the power source or turning off the circuit breaker that controls the garage door.

Step 2: Inspect the Cable

Inspect the cable to determine the extent of the damage. Look for any frayed or broken wires, kinks or twists, or signs of rust or corrosion. If the cable is severely damaged, it should be replaced.

Step 3: Loosen the Tension on the Spring

Loosen the tension on the spring by using a winding bar to turn the spring in the opposite direction of the cable. Be sure to turn the spring slowly and carefully, as it is under tension and can be dangerous.

Step 4: Remove the Cable

Using pliers, disconnect the cable from the bottom bracket of the garage door. Next, release the cable from the drum by loosening the set screws on the drum with a wrench. Carefully unwind the cable from the drum, being sure to keep a firm grip on the cable to prevent it from unraveling.

Step 5: Install the New Cable

Install the new cable by winding it around the drum in the opposite direction of the old cable. Be sure to wind the cable evenly and tightly to ensure smooth operation. Once the cable is properly wound around the drum, thread the cable through the bottom bracket and attach it securely with pliers.

Step 6: Reattach the Spring

Reattach the spring by using a winding bar to turn the spring in the same direction as the cable until it reaches the appropriate tension.

Step 7: Test the Door

Test the garage door to ensure that it is functioning properly. Open and close the door several times to ensure that it is moving smoothly and without any problems.

Step 8: Reconnect the Power

Once you have confirmed that the garage door is functioning properly, reconnect the power by plugging in the garage door opener or turning on the circuit breaker.

Conclusion

As stated in Garage Door Parma OH, fixing a garage door cable can be a complex and potentially dangerous process. If you are not comfortable working with garage doors, it is recommended that you hire a professional garage door technician to perform the repair. Additionally, it is important to inspect your garage door cables regularly to prevent damage and ensure the safe operation of your garage door.

Parma Garage Door Repair

3710 Albertly Ave #8, Parma, OH 44134

440-762-6587