Garage doors are essential components of our homes, providing security and convenience. However, like any mechanical part, First Call Garage Door of Missouri City Can wear out over time, leading to potential safety hazards and inconvenience. In this comprehensive guide, we will walk you through the process of changing a garage door spring, ensuring your garage door operates smoothly and safely.
Understanding Garage Door Springs
Before we dive into the steps of replacing a garage door spring, it’s crucial to understand the two main types of springs commonly used:
1. Torsion Springs
Torsion springs are mounted above the garage door and wind up when the door closes. They store energy and release it to help lift the door when you open it.
2. Extension Springs
Extension springs are installed on both sides of the garage door and stretch to provide the necessary force for lifting the door. They are typically found in older garage door systems.
Safety First: Tools and Precautions
Before attempting to change a garage door spring, ensure you have the following tools and take the necessary safety precautions:
Tools Needed
- Safety glasses
- Gloves
- Wrenches
- Clamps
- Vice grips
- Ladder
- Socket set
- C-clamps
Safety Precautions
- Disconnect the power: Unplug the garage door opener and disconnect it from the power source to prevent accidental activation.
- Secure the door: Use C-clamps to lock the door in place, preventing it from accidentally falling while you work on the springs.
- Wear safety gear: Always wear safety glasses and gloves to protect yourself from potential spring recoil.
Replacing Torsion Springs
Step 1: Measure the Spring
To replace a torsion spring, measure its length and diameter accurately. This information is essential when purchasing a replacement spring.
Step 2: Release Tension
Use a winding bar to unwind and release tension from the existing spring. Do this slowly and carefully to avoid injury.
Step 3: Remove the Old Spring
Once the tension is released, remove the old spring and disconnect it from the center bracket.
Step 4: Install the New Spring
Carefully install the new spring in place, ensuring it is tightly wound.
Step 5: Reattach Cables
Reattach the cables to the new spring and wind it up, applying tension as needed.
Replacing Extension Springs
Step 1: Disconnect the Safety Cable
Before replacing an extension spring, disconnect the safety cable from the door track.
Step 2: Remove the Old Spring
Carefully remove the old extension spring, ensuring it doesn’t snap back.
Step 3: Install the New Spring
Attach the new extension spring to the door track and secure it in place.
Step 4: Reattach Safety Cable
Reconnect the safety cable, ensuring it is properly tensioned.
Conclusion
Changing a First Call Garage Door of Missouri City is a task that requires precision and safety precautions. By following this step-by-step guide, you can ensure the job is done correctly, keeping your garage door operating smoothly and safely for years to come.
First Call Garage Door of Missouri City
1718 Crescent Oak Dr, Missouri City, TX 77459, United States
1-281-595-8036
Leave a Reply